Any of these styles will fit to your chimney.
Pick any style your prefer for your chimney and click NEXT >>>  or the picture you like to go on the next page.

Some DOWNDRAFT PROBLEMS Reviewd
Rain Problems & Vertical Wind Shift
Noisy Flue & Pilot light
Wind Shadow Downdraft
Cold Flue

You will have an option to chose metal type (stainless steel or copper) while ordering.

This  style is for square or rectangular flues.

 See available stock sizes at the bottom of the page.

Picture	Description	Be advised	Fuel Type
NEXT>>>	FLC ( Flue cap ). The Flue Cap is designed for basic flue protection against rain or snow, although it allows free flow of the smoke and fumes. This model feature side screening, that keeps birds and animals out of the chimney and also keeps larger sparks from exiting the chimney. Bolt down tops for easier cleaning.	We need you measure dimensions of your flue and we make our caps slightly larger to make sure it will fit over your flue. ***	Coal, Wood, Gas, Oil.
NEXT>>>	SRrt (SkyRider© cap with transition). SkyRider Cap turns its head depending on wind direction protecting your chimney with front skirt and living open space at rear for easy ventilation. As air moves over that cap, it creates low pressure of air at the top of the chimney. That effect cures downdraft and shifts residual fumes. SR is able to cure not severe downdraft problems and provides rain protection.	We need you measure dimensions of your flue and we make our caps slightly larger to make sure it will fit over your flue. ***	Coal, Wood, Gas, Oil.
NEXT>>>	DMrt (DraftMaster© Cap with transition). DraftMasters are specially designed to solve downdraft problems. It will cure all downdraft problems that are cap related and most of the problems that are not cap related. If tall trees or tall neighbor house causes wind to change direction vertically and it get inside of your flue to make downdraft, DraftMaster easily solves this type of problem. This cap is stationary, no moving parts inside.	We need you measure dimensions of your flue and we make our caps slightly larger to make sure it will fit over your flue. ***	Coal, Wood, Gas, Oil.
NEXT>>>	AMrt (AirManager© with transition). AirManager Cap is capable to cure downdraft problems that are cap related. The way it is built, AirManager will not allow gusty movements of air inside of the flue and it limits excessive updrafts providing smooth air flow. This cap is stationary, no moving parts inside.	We need you measure dimensions of your flue and we make our caps slightly larger to make sure it will fit over your flue. ***	Gas, Oil, other types of non heavy smoking fuels.

***There are 2 pressure bolts in each corner (8 total) for cap attachment and your flue should have at least 1.5"-2" of exposed length for secure installation. If your flue is flash to the chimney surface, we can make inside fit transition but it has to be custom order and you have to call or email us to order.

We sell only stock sizes online.
Check available stock sizes before you proceed.

If you do not see your chimney cap size in the table above, e-mail us your size and we might make it as a custom order. If the size or your chimney is significantly deviate from table sizes, email us picture or drawing of your chimney with dimensions you think might interest us. Should you have any questions, do not hesitate to e-mail us.

Phone   800-865-7603
FAX      800-865-7603

All dimensions provided in inches. If you prefer metric system, divide your measurements by 25.4 for millimeters (mm) or by 2.54 for centimeters (cm).
Example: you measured the length of your chimney crown 330mm (33cm), 330mm/25.4=13in or 33cm/2.54=13in. 

to see quality of T304 brushed surface stainless steel metal we use to make our caps, click on the picture below.

SkyRider shaft Maintenance: Clean as needed (once every 3 years recommended) and lubricate with a graphite based lubricant. Do not use petroleum base grease.