Plasma Spray Process
The Plasma Spray Process is basically the spraying of molten or heat
softened material onto a surface to provide a coating. Material in the
form of powder is injected into a very high temperature plasma flame,
where it is rapidly heated and accelerated to a high velocity. The hot
material impacts on the substrate surface and rapidly cools forming a
coating. This plasma spray process carried out correctly is called a
"cold process" (relative to the substrate material being coated) as the
substrate temperature can be kept low during processing avoiding
damage, metallurgical changes and distortion to the substrate material.
The plasma spray gun comprises a copper anode and tungsten cathode,
both of which are water cooled. Plasma gas (argon, nitrogen, hydrogen,
helium) flows around the cathode and through the anode which is shaped
as a constricting nozzle. The plasma is initiated by a high voltage
discharge which causes localised ionisation and a conductive path for a
DC arc to form between cathode and anode. The resistance heating from
the arc causes the gas to reach extreme temperatures, dissociate and
ionise to form a plasma. The plasma exits the anode nozzle as a free or
neutral plasma flame (plasma which does not carry electric current)
which is quite different to the Plasma Transferred Arc coating process
where the arc extends to the surface to be coated. When the plasma is
stabilised ready for spraying the electric arc extends down the nozzle,
instead of shorting out to the nearest edge of the anode nozzle. This
stretching of the arc is due to a thermal pinch effect. Cold gas around
the surface of the water cooled anode nozzle being electrically
non-conductive constricts the plasma arc, raising its temperature and
velocity. Powder is fed into the plasma flame most commonly via an
external powder port mounted near the anode nozzle exit. The powder is
so rapidly heated and accelerated that spray distances can be in the
order of 25 to 150 mm. Plasma Flame Theory
The plasma spray process is most commonly used in normal atmospheric
conditions and referred as APS. Some plasma spraying is conducted in
protective environments using vacuum chambers normally back filled with
a protective gas at low pressure, this is referred as VPS or LPPS.
Plasma spraying has the advantage that it can spray very high
melting point materials such as refractory metals like tungsten and
ceramics like zirconia unlike combustion processes. Plasma sprayed
coatings are generally much denser, stronger and cleaner than the other
thermal spray processes with the exception of HVOF, HVAF and cold spray
processes. Plasma spray coatings probably account for the widest range
of thermal spray coatings and applications and makes this process the
most versatile.
Disadvantages of the plasma spray process are relative high cost and
complexity of process.
Introducing
Nature of Thermal Spray Coatings
Surface Engineering in a Nutshell
Surface Engineering Forum
Thermal Spray Gun Repair Service
Plasma Consumable Parts
Thermal Spray Powder Supplies
Applications:
Thermal Spray Coatings on Carbon and Glass Fibre Reinforced Polymers
HVOF Coating of Paper Making Roll
Abradable Coatings
Thermal Spray Processes:
Combustion Wire Thermal Spray Process
Combustion Powder Thermal Spray Process
Arc Wire Thermal Spray Process
Plasma Thermal Spray Process
HVOF Thermal Spray Process
HVAF Thermal Spray Process
Detonation Thermal Spray Process
Plasma Flame Theory
Cold Spray Coating Process
Wear and Use of Thermal Spray Coatings
Corrosion and Use of Thermal Spray Coatings
Glossary of Thermal Spray and Surface Engineering Terms
Image Directory for Thermal Spray Coatings
Plasma Gas Flow Information
Plasma Gas Flow Correction Calculator
Contact Form
Links to other interesting sites related to thermal spray and surface engineering
Reciprocal Links
Periodic Table of the Elements
SI Units
Calculators for Conversion between Units of Measurement
Hardness Testing
Surface Engineering Message Board Archive
Surface Engineering Message Board Archive Index
Photography Gallery
Photography Gallery3
© Copyright Gordon England