And if your generator fed your building during an emergency. A problem arises and stops your generator. It's dark. It's panic! At the bottom of your electrical room, a panel of 5.7'' illuminates your room with a red flashing light as an image. You press the red light on and look at the alarm table. You quickly see the problem and take action to resolve it.

A rapid response is vital... The SoftPanel staff and you have understood that. That is why the EMRP3 exists!

The EMRP3 interface allows the user to remotely monitor all data (electricals, mechanicals and events tables) available from a Caterpillar® EMCP3® generator controller and its optional modules. It also allows for easy data access and remote control of the generator via its 5.7" high-resolution TFT color touch screen. The built-in "Web Gate" function allows independent access to the EMRP3 with our software SPV or a simple Internet browser no matter where the user is located in the world. The EMRP3 module also have a ModBUS slave communication port allowing the user to access the ModBUS register grouped into contiguous register. Its simple system architecture makes it easy to integrate to new or existing EMCP3® controller applications. You simply have to configure the ModBUS RS485 port on the EMCP3® controller. You can then connect it to the EMRP3 to up to 4km away using a simple twisted pair cable.

The EMRP3 connects to the controller, uploads its entire configuration, automatically recognizes installed EMCP3® options, populates all its monitoring screens and immediately starts real-time monitoring!